Winter Storm Warning until Fri 4:00 AMNWS Reno NV · tap for details

* CHANGES...Snow amounts reflect remaining accumulations. Wind gusts were updated. * WHAT...Heavy snow. Additional snow accumulations of 15 to 30 inches above 7000 feet and 8 to 14 inches around lake level. Wind gusts of 30 to 45 mph for Truckee and Lake Tahoe communities, with ridgetop gusts as high as 100 mph. Wave heights of 2 to 4 feet on Lake Tahoe. * WHERE...Greater Lake Tahoe Area. * WHEN...Until 4 AM PST Friday. * IMPACTS...Travel could be very difficult to impossible. The hazardous conditions will impact the Thursday commutes. Strong winds could cause damage to trees and power lines. Strong winds and rough waves on Lake Tahoe will create hazardous conditions for small watercraft. Slow down and use caution while traveling. The latest road conditions for the state you are calling from can be obtained by calling 5 1 1. Check with Caltrans and NDOT for the latest road conditions.

Avalanche Watch until Thu 5:00 AMNWS Reno NV · tap for details

AVAREV The following message is transmitted at the request of the U.S. Forest Service Sierra Avalanche Center. BACKCOUNTRY AVALANCHE WATCH IMMEDIATE BROADCAST REQUESTED 08:55 PST Wed Nov 18 2026 The Sierra Avalanche Center in Truckee has issued a BACKCOUNTRY AVALANCHE WATCH for the following areas: NWS Reno NV - NVZ002 (Greater Lake Tahoe)...CAZ072 (Greater Lake Tahoe (CA)) * WHAT...HIGH avalanche danger is anticipated in the backcountry from around sunset on Wednesday into early Friday morning. * WHERE...Central Sierra Nevada Mountains between Yuba Pass (Hwy 49) on the north and Ebbetts Pass(Hwy 4) on the south, including the greater Lake Tahoe area. This applies only to backcountry areas, not to ski areas and highways where avalanche mitigation programs exist. * WHEN...In effect from Wed 08:55 PST to Thu 05:00 PST. * IMPACTS...Significant snowfall may lead to widespread avalanche activity in the mountains. Large avalanches capable of burying or injuring people could occur in backcountry areas. * PRECAUTIONARY / PREPAREDNESS ACTIONS...Very dangerous avalanche conditions could occur in the backcountry. Traveling in, near, or below backcountry avalanche terrain during HIGH avalanche danger is not recommended. Consult https://www.sierraavalanchecenter.org/ or www.avalanche.org for more detailed information. Similar avalanche danger may exist at locations outside the coverage area of this or any avalanche center.

A certified welder in full PPE MIG welding a steel I-beam in a dark fabrication shop, sparks flying

Certified welding. Fabrication shop. Portable.

Custom metal fabrication, CNC plasma cutting and certified structural welding for homes, businesses and job sites. In the Reno shop or at your location. Serving Reno, Sparks, Truckee, Tahoe and Washoe County.

25+Years welding
14Years Iron Workers Union
OSHAand MSHA certified
PortableWe come to you

What we do

Residential and commercial. A small equipment repair gets the same care as a major industrial job. Iron, steel, stainless and aluminum. TIG, MIG, arc and flux core.

In shop or portable welding

Certified welding in the Reno shop, or on site with a fully equipped service truck: welding, pipe cutting and beveling at your location.

Custom metal fabrication

One of a kind builds to your exact specifications and approval, inspected throughout the job. Equipment fabrication and industrial projects.

CNC plasma cutting

Plasma table that cuts steel up to 2 inches thick, 10 by 46 foot capability. Detailed designs, business signs, parts and brackets.

Structural welding

Beams, columns, base plates and stair stringers. Certified processes and position qualified welders for connections that have to pass.

Railings, gates and staircases

Handrail, cable rail and picket for decks and stairs, driveway gates, security fencing and custom staircases.

Repair

Heavy equipment repair, truck flat beds, custom trailers, lumber racks, snow blowers and the things nobody else wants to fix.

Estimates are simple

Call Caddy, or send an email with a few photos and rough dimensions. We look at it, we quote it, we build it. No online forms, no design software, no account to make. Estimates are free.

Portable welding

The shop comes to the job.

A fully equipped service truck with its own power: welding, pipe cutting and beveling, equipment repair and structural work at your site, Reno to Tahoe, in the dirt and in the snow.

The shop

8345 Wise Ave, Reno. Heavy iron, tuned and ready, with the truck for everything that cannot come to us.

C.C. Welding shop floor in Reno with the 40 ton and 120 ton iron workers CNC plasma cutting table at C.C. Welding One ton shop crane lifting a fabricated steel frame C.C. Welding portable service truck on a Reno job C.C. Welding service truck with custom headache rack
  • CNC plasma tableCuts 2 inch steel, 10 by 46 foot capability
  • 120 ton iron workerPunches a 1.5 inch hole in 1 inch plate, 24 inch brake on quarter inch plate, slotted and square punches
  • 40 ton iron workerShears 3 by 3 by 3/8 inch angle, round and square bar, fast reproduction of like parts
  • 1600 Ellis band saw9 by 14 inch cut capability
  • Boise 3 HP drill pressShop drilling
  • 8,000 lb forkliftMaterial handling
  • 1 ton craneShop lifting
  • Service truckPortable welding, cutting and beveling on site

Partner, Craig "Caddy" Caddy

Craig Caddy, partner in C.C. Welding, at the shop with his dog

Craig, better known as Caddy, has been welding for over 25 years. He worked four years in certified shops and another 14 as a proud member of the Iron Workers Union. Along the way he started repairing heavy equipment on the side, and the side work grew into C.C. Welding. Today he runs the shop with his partner, Errol Kerr, a certified structural welder.

The shop has been in operation ever since, growing steadily while serving Reno and the surrounding Washoe County communities, with a lot of work up the hill in Truckee and around Lake Tahoe.

Certifications and qualified processes

OSHAMSHAFCAW-S 232 .0726-G Pipe E71T-8E71T-9-H8SMAW E-7018JP-1F-PLUGJP-3G-4GREBAR-1G-3GMIG ER70S-6 .035FCAW-G E71T-9-H8 .045TIGArc

Wholesale steel

Steel sourced direct from the manufacturer, Port of Oakland to Reno. An E Kerr LLC and C.C. Welding joint venture, delivered from the Wise Ave warehouse to your shop or job. Minimum order quantities apply; pricing follows the market and is quoted weekly. Call or email for current rates.

RebarGrade 60 deformed bar, #3 through #8, 20 and 40 foot lengths
HSS tubing2x2 to 6x6 square, 2x4 to 4x6 rectangular, 1/8 to 1/2 inch wall
PlateA36 hot rolled plate, 1/4 through 2 inch, cut to size
Trench plates4x8, 5x10 and 6x12 foot, 1 inch thick, for open trenches
StructuralWide flange beams, channel, angle and flat bar

Start a project

Shop phone(775) 772-9486 · Reno shop line for welding estimates
PartnersCraig "Caddy" Caddy and Errol Kerr
Service areaReno, Sparks, Truckee, Tahoe, Washoe County
Mon to Fri8:00 AM to 5:00 PM
Sat and SunClosed
EmergenciesCall, 24/7

Free estimate

A photo, a sketch on a napkin, or just an idea. Call or email it over and we will quote it and build it.

Call now Email for an estimate C.C. Welding on Facebook
About C.C. Welding

C.C. Welding is a certified welding and custom metal fabrication shop at 8345 Wise Ave in Reno, Nevada, run by partners Craig "Caddy" Caddy and Errol Kerr. Caddy is a certified welder with more than 25 years of welding and 14 years in the Iron Workers Union. The shop does structural welding, custom fabrication in iron, steel, stainless and aluminum, CNC plasma cutting, railings, gates and staircases, business signs, and heavy equipment, truck and trailer repair, in the shop or portable at your location, serving Reno, Sparks, Truckee, Lake Tahoe and Washoe County. Estimates are free: call (775) 772-9486 or email [email protected]. Errol Kerr is a certified structural welder and a partner, the owner of E Kerr LLC in Truckee, an excavation foreman at Ruppert Inc., a PSIA Level 3 ski instructor at Palisades Tahoe and a 2010 Olympian; E Kerr LLC and C.C. Welding supply wholesale steel together, and this page is C.C. Welding's home on errolkerr.com. See also the DIY build guides.